超越 UIView 界限的交互

Yes. You can override the hitTest:withEvent: method to return a view for a larger set of points than that view contains. See the UIView Class Reference.

Edit: Example:

- (UIView *)hitTest:(CGPoint)point withEvent:(UIEvent *)event
{
CGFloat radius = 100.0;
CGRect frame = CGRectMake(-radius, -radius,
self.frame.size.width + radius,
self.frame.size.height + radius);


if (CGRectContainsPoint(frame, point)) {
return self;
}
return nil;
}

Edit 2: (After clarification:) In order to ensure that the button is treated as being within the parent's bounds, you need to override pointInside:withEvent: in the parent to include the button's frame.

- (BOOL)pointInside:(CGPoint)point withEvent:(UIEvent *)event
{
if (CGRectContainsPoint(self.view.bounds, point) ||
CGRectContainsPoint(button.view.frame, point))
{
return YES;
}
return NO;
}

Note the code just there for overriding pointInside is not quite correct. As Summon explains below, do this:

-(BOOL)pointInside:(CGPoint)point withEvent:(UIEvent *)event
{
if ( CGRectContainsPoint(self.oversizeButton.frame, point) )
return YES;


return [super pointInside:point withEvent:event];
}

Note that you'd very likely do it with self.oversizeButton as an IBOutlet in this UIView subclass; then you can just drag the "oversize button" in question, to, the special view in question. (Or, if for some reason you were doing this a lot in a project, you'd have a special UIButton subclass, and you could look through your subview list for those classes.) Hope it helps.

@jnic, I am working on iOS SDK 5.0 and in order to get your code working right I had to do this:

- (BOOL)pointInside:(CGPoint)point withEvent:(UIEvent *)event {
if (CGRectContainsPoint(button.frame, point)) {
return YES;
}
return [super pointInside:point withEvent:event]; }

The container view in my case is a UIButton and all the child elements are also UIButtons that can move outside the bounds of the parent UIButton.

Best

Swift:

Where targetView is the view you wish to receive the event (which may be entirely or partially located outside of the frame of its parent view).

override func hitTest(point: CGPoint, withEvent event: UIEvent?) -> UIView? {
let pointForTargetView: CGPoint = targetView.convertPoint(point, fromView: self)
if CGRectContainsPoint(targetView.bounds, pointForTargetView) {
return closeButton
}
return super.hitTest(point, withEvent: event)
}

In the parent view you can override the hit test method:

- (UIView *)hitTest:(CGPoint)point withEvent:(UIEvent *)event
{
CGPoint translatedPoint = [_myButton convertPoint:point fromView:self];


if (CGRectContainsPoint(_myButton.bounds, translatedPoint)) {
return [_myButton hitTest:translatedPoint withEvent:event];
}
return [super hitTest:point withEvent:event];


}

In this case, if the point falls within the bounds of your button, you forward the call there; if not, revert to the original implementation.

In my case, I had a UICollectionViewCell subclass that contained a UIButton. I disabled clipsToBounds on the cell and the button was visible outside of the cell's bounds. However, the button was not receiving touch events. I was able to detect the touch events on the button by using Jack's answer: https://stackoverflow.com/a/30431157/3344977

Here's a Swift version:

override func hitTest(point: CGPoint, withEvent event: UIEvent?) -> UIView? {


let translatedPoint = button.convertPoint(point, fromView: self)


if (CGRectContainsPoint(button.bounds, translatedPoint)) {
print("Your button was pressed")
return button.hitTest(translatedPoint, withEvent: event)
}
return super.hitTest(point, withEvent: event)
}

Swift 4:

override func hitTest(_ point: CGPoint, with event: UIEvent?) -> UIView? {


let translatedPoint = button.convert(point, from: self)


if (button.bounds.contains(translatedPoint)) {
print("Your button was pressed")
return button.hitTest(translatedPoint, with: event)
}
return super.hitTest(point, with: event)
}

For me (as for others), the answer was not to override the hitTest method, but rather the pointInside method. I had to do this in only two places.

The Superview This is the view that if it had clipsToBounds set to true, it would make this whole problem disappear. So here's my simple UIView in Swift 3:

class PromiscuousView : UIView {
override func point(inside point: CGPoint,
with event: UIEvent?) -> Bool {
return true
}
}

The Subview Your mileage may vary, but in my case I also had to overwrite the pointInside method for the subview that was had decided the touch was out of bounds. Mine is in Objective-C, so:

- (BOOL)pointInside:(CGPoint)point withEvent:(UIEvent *)event {
WEPopoverController *controller = (id) self.delegate;
if (self.takeHitsOutside) {
return YES;
} else {
return [super pointInside:point withEvent:event];
}
}

This answer (and a few others on the same question) can help clear up your understanding.

Why this is happening?

This is because when your subview lies outside of your superview's bounds, touch events that actually happens on that subview will not be delivered to that subview. However, it WILL be delivered to its superview.

Regardless of whether or not subviews are clipped visually, touch events always respect the bounds rectangle of the target view’s superview. In other words, touch events occurring in a part of a view that lies outside of its superview’s bounds rectangle are not delivered to that view. Link

What you need to do?

When your superview receives the touch event mentioned above, you'll need to tell UIKit explicitly that my subview should be the one to receive this touch event.

What about the code?

In your superview, implement func hitTest(_ point: CGPoint, with event: UIEvent?)

override func hitTest(_ point: CGPoint, with event: UIEvent?) -> UIView? {
if isHidden || alpha == 0 || clipsToBounds { return super.hitTest(point, with: event) }
// convert the point into subview's coordinate system
let subviewPoint = self.convert(point, to: subview)
// if the converted point lies in subview's bound, tell UIKit that subview should be the one that receives this event
if !subview.isHidden && subview.bounds.contains(subviewPoint) { return subview }
return super.hitTest(point, with: event)
}

Fascinating gotchya: you must go to the "highest too-small superview"

You have to go "up" to the "highest" view which the problem view is outside.

Typical example:

Say you have a screen S, with a container view C. The container viewcontroller's view is V. (Recall V will sit inside of C and be the identical size.) V has a subview (maybe a button) B. B is the problem view which is actually outside of V.

But note that B is also outside of C.

In this example you have to apply the solution override hitTest in fact to C, not to V. If you apply it to V - it does nothing.

swift 4.1 updated

To get touch events in same UIView you just need to add following override method, it will identify specific view tapped in UIView which is placed out of bound

override func hitTest(_ point: CGPoint, with event: UIEvent?) -> UIView? {
let pointforTargetview:CGPoint = self.convert(point, to: btnAngle)
if  btnAngle.bounds.contains(pointforTargetview) {
return  self
}
return super.hitTest(point, with: event)
}

I know this is very old question but still we need these solutions as updated version that's why I'll share new version solution of this problem.

Let's think my mainView frame is CGRect(0.0, 0.0, 250, 250.0) and I want to add a button sized width & height 50 at as subView of my mainView (to topLeft corner), it's frame will look like CGRect(-50, -50, 50, 50) in mainViewin this case we cannot interact with this button and here is an example for how to solve this problem

In your MainView (button container view) override hitTestfunction as mentioned in other answers but here reverse subviews order and convert hit point to this subview point then only check the result with hitTest again else check if your view contains that point return your mainView else return nil to avoid affecting other views

override func hitTest(_ point: CGPoint, with event: UIEvent?) -> UIView? {
guard !clipsToBounds && !isHidden && alpha > 0 else { return self.superview }
for member in subviews.reversed() {
let subPoint = member.convert(point, from: self)
guard let result = member.hitTest(subPoint, with: event) else { continue }
return result
}
return self.bounds.contains(point) ? self : nil
}

I have tested and used this code in my own app and it works well.

Swift 5 version of the first part of jnic's answer:

override func hitTest(_ point: CGPoint, with event: UIEvent?) -> UIView? {
let radius: CGFloat = 100


let frame = CGRect(
x: -radius,
y: -radius,
width: frame.width + radius * 2,
height: frame.height + radius * 2
)


if frame.contains(point) {
return self
}
    

return nil
}