在 AWS Amazon Linux (EC2) AMI 上安装 PostgreSQL 客户端 v10

小开

Packages/Repos which is designed to work of RedHat will work on Amazon Linux also, Amazon Linux is a minimal-install version of RHEL. You may run into compatibility issues if you select old version of Amazon Linux (Amazon linux 1) for the below steps, otherwise it should work fine in the latest version Amazon Linux 2.

Check Amazon Linux version

[ec2-user ~]$ cat /etc/system-release
Amazon Linux release 2.0 (2017.12) LTS Release Candidate

Install RHEL 7 yum repo for PostgreSQL

[ec2-user ~]$ sudo yum install -y  https://download.postgresql.org/pub/repos/yum/10/redhat/rhel-7-x86_64/pgdg-redhat10-10-2.noarch.rpm


[ec2-user ~]$ sudo sed -i "s/rhel-\$releasever-\$basearch/rhel-latest-x86_64/g" "/etc/yum.repos.d/pgdg-10-redhat.repo"

Install PostgreSQL Client v10

[ec2-user ~]$ sudo yum install -y postgresql10
[ec2-user ~]$ psql --version
psql (PostgreSQL) 10.3

Read more about Amazon Linux 2

Note! Amazon Linux 2 provides additional package installation through Amazon Linux Extras Repository (amazon-linux-extras) ((client only)). Since postgresql10 is not yet available, adding extra yum repo is the only solution per today.

UDATE 2019May

those who see

Error: Package: pgdg-redhat-repo-42.0-4.noarch (/pgdg-redhat-repo-latest.noarch)

Requires: /etc/redhat-release

may still install step by step all dependencies and the server with:

yum install -y https://download.postgresql.org/pub/repos/yum/10/redhat/rhel-latest-x86_64/postgresql10-libs-10.7-2PGDG.rhel7.x86_64.rpm
yum install -y https://download.postgresql.org/pub/repos/yum/10/redhat/rhel-latest-x86_64/postgresql10-10.7-2PGDG.rhel7.x86_64.rpm
yum install -y https://download.postgresql.org/pub/repos/yum/10/redhat/rhel-latest-x86_64/postgresql10-server-10.7-2PGDG.rhel7.x86_64.rpm

小开

Adapting Haneef Mohammed's answer for Amazon Linux 1 (tested on 2018.03):

Go to the Postgres repositories page and grab the URL for 'Red Hat Enterprise Linux 6 - x86_64'. Install the PG repos and amend the entries, replacing '$releasever' with '6.9' (or newer?):

[ec2-user ~]$ sudo yum install -y  https://download.postgresql.org/pub/repos/yum/10/redhat/rhel-6-x86_64/pgdg-redhat10-10-2.noarch.rpm


[ec2-user ~]$ sudo sed -i "s/rhel-\$releasever-\$basearch/rhel-6.9-x86_64/g" "/etc/yum.repos.d/pgdg-10-redhat.repo"

Second part is the same:

[ec2-user ~]$ sudo yum install -y postgresql10
[ec2-user ~]$ psql --version
psql (PostgreSQL) 10.3

小开

最佳答案

You can try to run the following command on your Linux server:

sudo amazon-linux-extras install postgresql10

小开

The way I resolved the issue was by running

yum clean all

before

yum install -y postgresql10

on Amazon Linux

小开

Since none of the previous answers worked for me, I'm adding a solution that let me install the postgresql10 client. We're using VERSION="2018.03" of Amazon Linux AMI in our pipelines.

Building from source:

^{Note: The link below points to postgresql 10.4, you may want to check for newer subversions}

sudo yum install -y gcc readline-devel zlib-devel
wget https://ftp.postgresql.org/pub/source/v10.4/postgresql-10.4.tar.gz
tar -xf postgresql-10.4.tar.gz
cd postgresql-10.4
./configure
make -C src/bin
sudo make -C src/bin install
make -C src/include
sudo make -C src/include install
make -C src/interfaces
sudo make -C src/interfaces install
make -C doc
sudo make -C doc install

The new package should be installed with all its executables in here: /usr/local/pgsql/bin

Now, keep in mind that commands psql, pg_dump etc. still point to the old version of the psql client. You can run with the full executable paths (/usr/local/pgsql/bin/psql) or prepend the new directory at the beginning of your $PATH so that the system will look it up first:

Edit ~/.bash_profile adding this at the end:

export PATH="/usr/local/pgsql/bin:$PATH"

Then run:

source ~/.bash_profile

Now everything should be ready:

[ec2-user@ip-xx-x-x-xxx ~]$ psql --version
psql (PostgreSQL) 10.4

小开

for v11 on Amazon Linux 2 I had to do

yum -y install https://download.postgresql.org/pub/repos/yum/11/redhat/rhel-7-x86_64/pgdg-centos11-11-2.noarch.rpm
sed -i "s/rhel-\$releasever-\$basearch/rhel-7-x86_64/g" "/etc/yum.repos.d/pgdg-11-centos.repo"

小开

This my 2019 solution:

Just do

 sudo amazon-linux-extras install postgresql9.6

You should not have to download it from any outside source, since it is already given to you by default from Amazon, all you have to do is install it.

The other solutions didnt work for me and I spent a good amount time banging my head against the wall trying to figure out why.

And surprisingly even though you install psql9.6 you get version 10.

小开

As of May 25th, 2019, the following direct RPM installation worked for me on Amazon Linux 1 2018.03 (latest Beanstalk platform version) to install PostgreSQL Client 10.7:

sudo rpm -ivh --force https://yum.postgresql.org/testing/10/redhat/rhel-6-x86_64/postgresql10-libs-10.7-2PGDG.rhel6.x86_64.rpm
sudo rpm -ivh --force https://yum.postgresql.org/testing/10/redhat/rhel-6-x86_64/postgresql10-10.7-2PGDG.rhel6.x86_64.rpm

小开

PGDG repo is no longer available for Amazon Linux. So you can use amazon repo.

amazon-linux-extras install postgresql10 vim epel -y

Or follow this article

https://installvirtual.com/install-postgresql-10-on-amazon-ec2/

小开

PSql10.7 installation (08/20/2019)

Remove all of the older version Psql client and perform the below steps:

wget https://yum.postgresql.org/10/redhat/rhel-6.9-x86_64/postgresql10-libs-10.7-1PGDG.rhel6.x86_64.rpm
wget https://yum.postgresql.org/10/redhat/rhel-6.9-x86_64/postgresql10-10.7-1PGDG.rhel6.x86_64.rpm
sudo rpm -ivh postgresql10-libs-10.7-1PGDG.rhel6.x86_64.rpm
sudo rpm -ivh postgresql10-10.7-1PGDG.rhel6.x86_64.rpm

小开

The following works for psql v11 on Amazon Linux (v1)

wget https://yum.postgresql.org/11/redhat/rhel-6.9-x86_64/postgresql11-libs-11.8-1PGDG.rhel6.x86_64.rpm
wget https://yum.postgresql.org/11/redhat/rhel-6.9-x86_64/postgresql11-11.8-1PGDG.rhel6.x86_64.rpm


sudo yum clean all
sudo rpm -ivh postgresql11-libs-11.8-1PGDG.rhel6.x86_64.rpm
sudo rpm -ivh postgresql11-11.8-1PGDG.rhel6.x86_64.rpm