带 SSL 的 npm http-server

First, make sure that you have key.pem and cert.pem files. You can generate them using this command:

openssl req -newkey rsa:2048 -new -nodes -x509 -days 3650 -keyout key.pem -out cert.pem

You will be prompted with a few questions after entering the command. Use 127.0.0.1 as value for "Common name" if you want to be able to install the certificate in your OS's root certificate store or browser so that it is trusted.

This generates a cert-key pair and it will be valid for roughly 10 years (3650 days to be exact).

Then you need to run the server with -S for enabling SSL and -C for your certificate file:

$ http-server -S -C cert.pem -o
Starting up http-server, serving ./ through https
Available on:
https:127.0.0.1:8080
https:192.168.1.101:8080
https:192.168.1.104:8080
Hit CTRL-C to stop the server

Just for future reference, my problem was solved by updating the package to the latest version in package.json. I copy-pasted an old example file without updating the version numbers.

EDIT: Since writing this answer there is a new tool mkcert that does this for you. See https://stackoverflow.com/a/61905546/9540493 instead. My original answer below for historical interest.

Firefox didn't accept self-signed certs, so a bit more effort was required. First create a CA:

openssl req -batch -new -newkey ec:(openssl ecparam -name prime256v1|psub) -nodes -keyout ca-key.pem -x509 -out ca.pem -days 3650 -subj "/CN=A localhost CA"

Add ca.pem (A localhost CA) to trusted certs of your OS and/or Firefox (other browsers use system CAs). Keep the ca* files in a secure location for future use, so you never have to do this again.

Then, for any site that you are running, and whenever you wish to change settings, create cert.pem and key.pem with:

openssl req -batch -new -newkey ec:(openssl ecparam -name prime256v1|psub) -nodes -keyout key.pem -subj /CN=localhost | openssl x509 -req -CAkey ca-key.pem -CA ca.pem -CAcreateserial -out cert.pem -days 365 -extfile (echo subjectAltName=DNS:localhost|psub)

The above should work on most systems. If not, you might want to create temporary files ecparam.tmp and ext.tmp. Commands functionally equivalent to the two oneliners:

# Output Elliptic Curve parameters to a temporary file
openssl ecparam -name prime256v1 -out ecparam.tmp


# Create CA
openssl req -batch -new -newkey ec:ecparam.tmp -nodes -keyout ca-key.pem \
-x509 -out ca.pem -days 3650 -subj "/CN=A localhost CA"


# Create a CSR for localhost, then sign it by CA
echo subjectAltName=DNS:localhost > ext.tmp
openssl req -batch -new -newkey ec:ecparam.tmp -nodes -keyout key.pem \
-subj /CN=localhost | openssl x509 -req -CAkey ca-key.pem -CA ca.pem \
-CAcreateserial -out cert.pem -days 365 -extfile ext.tmp

I installed mkcert:

brew install mkcert
brew install nss # if you use Firefox

mkcert -install

Then, in your project directory:

mkcert 0.0.0.0 localhost 127.0.0.1 ::1

Finally, I renamed generated files:

• 0.0.0.0+3-key.pem -> key.pem
• 0.0.0.0+3.pem -> cert.pem

And ran the following command:

http-server -S -C cert.pem -o

Then I got:

I referenced this blog: https://qiita.com/walkers/items/b90a97a99bbb27f6550f (written in Japanese)