Dyld: 库未加载:@rpath/libSwift tAVFoundation.dylib

我刚刚更新到 Xcode 7和 Swift 2，并完成了修复转换过程中出现的错误。我最终得到了项目构建，但在启动屏幕后，我得到一个错误说:

Dyld: 库未加载:@rpath/libift tAVFoundation.dylib 引自:/var/mobile/Container/Bundle/Application/..。
原因: 找不到合适的图像。找到了: /private/var/mobile/Container/Bundle/Application/.../Framework/libift/AVFoundation.dylib: Mmap () errno = 1验证 ”/private/var/mobile/Container/Bundle/Application/.../Framework/libift tAVFoundation.dylib’

我以前在其他框架中看到过这个错误，但是不能解决我的问题。有没有办法通过在某个地方添加我的框架来绕过这个问题？

54671 次浏览
小开

Similar question below, the answers there may offer some help. dyld: Library not loaded: @rpath/libswiftCore.dylib

For me the only solution that worked was as @morten-holmgaard suggested in his comment.

I have also tried to change the "Embedded Content Contains Swift Code" flag to true in build settings, but it had no effect.

小开
最佳答案

Try to do clean, build and then run the project. Worked for me.

小开

This can be a problem with certificates. Go to the Apple developer member center and make sure you have "Organizational Unit" set in your distribution profile.

Also take a look in the logs for the text deny-mmap, this will probably help you further.

I ran into this problem with a Xamarin application for the Apple Watch. The main application and the Mono framework were signed and working, but the Watchkit Extension did not load due to the dyld error.

小开

When the answer marked as correct didn't work for me I added the following to "Build Settings > Linking > Runpath Search Paths":

@executable_path/Frameworks
小开

None of the above solutions worked for me. In the end the problem was my signing certificate's trust settings. They were set to "Always Trust" which seemed to cause this issue. Switching it back "Use System Defaults" fixed it for me.

In my case I originally changed the certs trust settings because I had issues building remotely. I was able to fix both issues by switching the trust settings to "Use System Defaults" globally and "Always Allow" for SSL.

Hope this helps someone.

小开

Changing the Build Settings -> "Embedded Content Contains Swift Code" flag to true/yes worked for me.

小开

For the framework I am using on OSX (MailCore2) I had to set my target's

"Build Settings > Linking > Runpath Search Paths" to @loader_path

a solution I found here:

http://www.dribin.org/dave/blog/archives/2009/11/15/rpath/

小开

In Xcode 8 updating the Build Setting

Always Embed Swift Standard Libraries to Yes

worked for me.

小开

I got this problem when trying to remove my provisioning profile and app certificate. Then all my swift projects have this problem. After almost an hour i found that just simply clean the project by:

Click on Product -> Clean (or CMD-Shift-K)

And the projects will run normally.

小开

I ran into this issue with Xcode 9. This did the trick for me:

Project > Build Settings > Swift Compiler - Search Path: Setting "Import Paths" to $(PROJECT_DIR) (recursive)

小开

There are two solutions for this:

Solution 1:

  1. Quit Xcode (cmd + Q)
  2. Open and Clean Project (ABC1 + ABC2 + k)
  3. Now, run the project which should work correctly

Solution 2:

The console log itself states that dynamic link editor (dyld) is not able to load library. In order to fix this use below steps :

  1. Select Project -> Build settings ->
  2. Go to Build options tab -> Select ‘Always Embed Swift Standard Libraries’ to ‘Yes’
  3. Now, run the project which should work correctly

Screenshot with steps


提交答案