PHP 警告: 模块已经在第0行的 Unknown 中加载

小开

最佳答案

I think you have loaded Xdebug probably twice in php.ini.

check the php.ini, that not have set xdebug.so for the values extension= and zend_extension=.
Check also /etc/php5/apache2 and /etc/php5/cli/. You should not load in each php.ini in these directories the extension xdebug.so. Only one file, php.ini should load it.

Note: Inside the path is the string /etc/php5. The 5 is the version of PHP. So if you use another version, you always get a different path, like php7.

小开

You should have a /etc/php2/conf.d directory (At least on Ubuntu I do) containing a bunch of .ini files which all get loaded when php runs. These files can contain duplicate settings that conflict with settings in php.ini. In my PHP installation I notice a file conf.d/20-intl.ini with an extension=intl.so setting. I bet that's your conflict.

小开

There are two "php_intl.dll" files inside php.ini file on 872 and 968 number lines. if php warning module 'intl' already loaded in unknown on line 0 this message is focused on your CLI. Then you should have to remove the semiclone prefixes on line 872. I expect this will done.....

小开

I had the same issue after upgrading from Fedora Server 24 (PHP 5) to 25 (PHP 7). After investigation, I found that /etc/php.d/ had two different .ini files loading extension=geoip.so.

Previous version of distros had this file named 50-geoip.ini but the recent was changed to 40-geoip.ini, and I suspect that in the version-upgrade process the old hasn't been removed, while the new one has been created.

That was the actual case of the issue. After removing stray 50-geoip.ini from /etc/php.d/ and restarting httpd it just worked flawlessly.

小开

To fix this problem, you must edit your php.ini (or extensions.ini) file and comment-out the extensions that are already compiled-in. For example, after editing, your ini file may look like the lines below:

;extension=pcre.so
;extension=spl.so

Source: http://www.somacon.com/p520.php

小开

I had the same issue on mac i.e. Warning: Module 'pdo_pgsql' already loaded in Unknown on line 0. Here's how I solved it.

Locate the folder conf.d, mine was in the directory /usr/local/etc/php/7.0/conf.d.
In this folder, there's a file called ext-pdo_pgsql.ini.
Type sudo nano ext-pdo_pgsql.ini to edit it.
There should be a line extension="/usr/local/opt/php70-pdo-pgsql/pdo_pgsql.so". Comment it out by adding semi-colon to the beginning of the line i.e. ;extension="/usr/local/opt/php70-pdo-pgsql/pdo_pgsql.so".
Save the file. (I usually run control + O, control + M).
Exit the file (control + X).

Hope this helps someone.

小开

I deleted the 20-mongo.ini file in /etc/php5/cli/conf.d and this solved the problem.

小开

In my case I had uncoment the ;extension=php_curl.so in php.ini, but Ubuntu was already calling this extension somewhere else.

To find this "somewhere else", on php.ini will informe. On my case: /etc/php/7.1/apache2/conf.d/20-curl.ini was the path.

So now we edit this file (terminal):

sudo nano /etc/php/7.1/apache2/conf.d/20-curl.ini

Comment the ;extension=php_curl.so

Save file and restart apache:

sudo systemctl restart apache2

小开

I had a similar problem, the problem was that the extension intl was duplicated.

You can check in file C:/xampp/php/php.ini and find "intl". In my case extension=intl is already present and I scrolled again and found a second intl "extension=php_intl.dll".

The extension must one to execution can't execution extension intl again. This will show error like this "Module 'intl' already loaded".

I fixed it by commenting out extension=php_intl.dll using ";" like this ;extension=php_intl.dll. and restarted the apache service.

小开

Just for the record as it might help others who are on shared hosting (cPanel).

I had error on shared hosting php7.2: Module 'imagick' already loaded in Unknown on line 0

In the beginning hosting provider said it was my bad configuration (running Yii2.16). But after I showed them, that all Internet related this issue to server configuration -they started to listen to me. After I proved, that there was no error on php7.1 they started to search for the error.

As they told to me - the error was due to configuration in PERL modules or PEAR package, but they did not told me the real issue.

So, if you are on shared hosting - talk to you provider and experiment with PHP versions (if you can change them).

小开

Comment out these two lines in php.ini

;extension=imagick.so
;extension="ixed.5.6.lin"

it should fix the issue.

小开

For issue related to code igniter project upload,
go to the base directory index.php and add this code:


if ($_SERVER['SERVER_NAME'] == 'local_server_name') {
define('ENVIRONMENT', 'development');
} else {
define('ENVIRONMENT', 'production');
}


if (defined('ENVIRONMENT')){
switch (ENVIRONMENT){
case 'development':
error_reporting(E_ALL);
break;


case 'testing':
case 'production':
error_reporting(0);
break;


default:
exit('The application environment is not set correctly.');
}
}




define('ENVIRONMENT', isset($_SERVER['CI_ENV']) ? $_SERVER['CI_ENV'] : 'development');

小开

I figured this out by printing the PHP configuration and searching by xml.ini. Notice in the following output how xml is loaded twice (first as 20-xml.ini and then as xml.ini):

$ php -i | grep xml
/etc/php.d/20-simplexml.ini,
/etc/php.d/20-xml.ini,
/etc/php.d/20-xmlwriter.ini,
/etc/php.d/30-xmlreader.ini,
/etc/php.d/xml.ini
xmlrpc_error_number => 0 => 0
xmlrpc_errors => Off => Off
libxml Version => 2.9.1
libxml
mbstring.http_output_conv_mimetypes => ^(text/|application/xhtml\+xml) => ^(text /|application/xhtml\+xml)
xml
libxml2 Version => 2.9.1
xmlreader
xmlwriter
libxslt compiled against libxml Version => 2.9.1

小开

For shared hosting, in cPanel I unchecked the Module in question under "Select PHP Version" > "Extensions" and the error disappeared for PHP 7.4.

小开

In Windows 10, I fix this by comment like this

;extension=php_sockets.dll

小开

Run php --ini and notice file path on Loaded Configuration File.
Then run command like cat -n /etc/php/7.2/cli/php.ini | grep intl to find if the extension is commented or not.
Then update loaded configuration file by commenting line by adding ; such as ;extension=intl

This can happen when you install php-intl package and also enable the same extension on php.ini file.

小开

If you are on shared hosting, just apply the default php settings. Cpanel overrides php settings to default.

小开

I am using WAMP in Windows 10 with PHP 7.2.10. I was able to solve it through commenting the line extension=ftp in php.ini inside wamp64\bin\php\php7.2.10 .

I am unsure but my guess why this happens is that my php.ini inside wamp64\bin\apache\apache2.4.35\bin already loads this module.

Be sure to restart all services of WAMP after doing so.

小开

I had the same issue so I commented the extension=mysqli as I included this to run sql server. Check if you have uncommented this extension=mysqli if so, place ; in php.ini

小开

I resolved this issue by removing php.ini file from extension=grpc commenting like this ;extension=grpc

小开

solved by commenting extension=curl