类型别名和类型别名在榆树中的区别？

在榆树，我不能算出什么时候 type是适当的关键字与 type alias。文档似乎没有对此做出解释，我在发布说明中也找不到解释。有记录在案吗？

7478 次浏览
小开
最佳答案

How I think of it:

type is used for defining new union types:

type Thing = Something | SomethingElse

Before this definition Something and SomethingElse didn't mean anything. Now they are both of type Thing, which we just defined.

type alias is used for giving a name to some other type that already exists:

type alias Location = { lat:Int, long:Int }

{ lat = 5, long = 10 } has type { lat:Int, long:Int }, which was already a valid type. But now we can also say it has type Location because that is an alias for the same type.

It is worth noting that the following will compile just fine and display "thing". Even though we specify thing is a String and aliasedStringIdentity takes an AliasedString, we won't get an error that there is a type mismatch between String/AliasedString:

import Graphics.Element exposing (show)


type alias AliasedString = String


aliasedStringIdentity: AliasedString -> AliasedString
aliasedStringIdentity s = s


thing : String
thing = "thing"


main =
show <| aliasedStringIdentity thing
小开

The key is the word alias. In the course of programming, when you want to group things that belong together, you put it in a record, like in the case of a point 

{ x = 5, y = 4 }

or a student record.

{ name = "Billy Bob", grade = 10, classof = 1998 }

Now, if you needed to pass these records around, you'd have to spell out the entire type, like:

add : { x:Int, y:Int } -> { x:Int, y:Int } -> { x:Int, y:Int }
add a b =
{ a.x + b.x, a.y + b.y }

If you could alias a point, the signature would be so much easier to write!

type alias Point = { x:Int, y:Int }
add : Point -> Point -> Point
add a b =
{ a.x + b.x, a.y + b.y }

So an alias is a shorthand for something else. Here, it's a shorthand for a record type. You can think of it as giving a name to a record type you'll be using often. That's why it's called an alias--it's another name for the naked record type that's represented by { x:Int, y:Int }

Whereas type solves a different problem. If you're coming from OOP, it's the problem you solve with inheritance, operator overloading, etc.--sometimes, you want to treat the data as a generic thing, and sometimes you want to treat it like a specific thing.

A commonplace where this happens is when passing around messages--like the postal system. When you send a letter, you want the postal system to treat all messages as the same thing, so you only have to design the postal system once. And besides, the job of routing the message should be independent of the message contained within. It's only when the letter reaches its destination do you care about what the message is.

In the same way, we might define a type as a union of all the different types of messages that could happen. Say we're implementing a messaging system between college students to their parents. So there are only two messages college kids can send: 'I need beer money' and 'I need underpants'.

type MessageHome = NeedBeerMoney | NeedUnderpants

So now, when we design the routing system, the types for our functions can just pass around MessageHome, instead of worrying about all the different types of messages it could be. The routing system doesn't care. It only needs to know it's a MessageHome. It's only when the message reaches its destination, the parent's home, that you need to figure out what it is.

case message of
NeedBeerMoney ->
sayNo()
NeedUnderpants ->
sendUnderpants(3)

If you know the Elm architecture, the update function is a giant case statement, because that's the destination of where the message gets routed, and hence processed. And we use union types to have a single type to deal with when passing the message around, but then can use a case statement to tease out exactly what message it was, so we can deal with it.

小开

The main difference, as I see it, is whether type checker will yell on you if you use "synomical" type.

Create the following file, put it somewhere and run elm-reactor, then go to http://localhost:8000 to see the difference:

-- Boilerplate code


module Main exposing (main)


import Html exposing (..)


main =
Html.beginnerProgram
{
model = identity,
view = view,
update = identity
}


-- Our type system


type alias IntRecordAlias = {x : Int}
type IntRecordType =
IntRecordType {x : Int}


inc : {x : Int} -> {x : Int}
inc r = {r | x = .x r + 1}


view model =
let
-- 1. This will work
r : IntRecordAlias
r = {x = 1}


-- 2. However, this won't work
-- r : IntRecordType
-- r = IntRecordType {x = 1}
in
Html.text <| toString <| inc r

If you uncomment 2. and comment 1. you will see:

The argument to function `inc` is causing a mismatch.


34|                              inc r
^
Function `inc` is expecting the argument to be:


{ x : Int }


But it is:


IntRecordType
小开

Let me complement the previous answers by focusing on use-cases and providing a little context on constructor functions and modules.


Usages of type alias

  1. Create an alias and a constructor function for a record
    This the most common use-case: you can define an alternate name and constructor function for a particular kind of record format.

    type alias Person =
{ name : String
, age : Int
}

    Defining the type alias automatically implies the following constructor function (pseudo code):
    Person : String -> Int -> { name : String, age : Int }
    This can come handy, for instance when you want to write a Json decoder.

    personDecoder : Json.Decode.Decoder Person
personDecoder =
Json.Decode.map2 Person
(Json.Decode.field "name" Json.Decode.String)
(Json.Decode.field "age" Int)


  2. Specify required fields
    They sometimes call it "extensible records", which can be misleading. This syntax can be used to specify that you are expecting some record with particular fields present. Such as:

    type alias NamedThing x =
{ x
| name : String
}


showName : NamedThing x -> Html msg
showName thing =
Html.text thing.name

    Then you can use the above function like this (for example in your view):

    let
joe = { name = "Joe", age = 34 }
in
showName joe

    Richard Feldman's talk on ElmEurope 2017 may provide some further insight into when this style is worth using.

  3. Renaming stuff
    You might do this, because the new names could provide extra meaning later on in your code, like in this example 

    type alias Id = String


type alias ElapsedTime = Time


type SessionStatus
= NotStarted
| Active Id ElapsedTime
| Finished Id

    Perhaps a better example of this kind of usage in core is Time.

  4. Re-exposing a type from a different module
    If you are writing a package (not an application), you may need to implement a type in one module, perhaps in an internal (not exposed) module, but you want to expose the type from a different (public) module. Or, alternatively, you want to expose your type from multiple modules.
    Task in core and Http.Request in Http are examples for the first, while the Json.Encode.Value and Json.Decode.Value pair is an example of the later.

    You can only do this when you otherwise want to keep the type opaque: you don't expose the constructor functions. For details see usages of type below.

It is worth noticing that in the above examples only #1 provides a constructor function. If you expose your type alias in #1 like module Data exposing (Person) that will expose the type name as well as the constructor function.



Usages of type

  1. Define a tagged union type
    This is the most common use-case, a good example of it is the Maybe type in core:

    type Maybe a
= Just a
| Nothing

    When you define a type, you also define its constructor functions. In case of Maybe these are (pseudo-code):

    Just : a -> Maybe a


Nothing : Maybe a

    Which means that if you declare this value:

    mayHaveANumber : Maybe Int

    You can create it by either 

    mayHaveANumber = Nothing

    or

    mayHaveANumber = Just 5

    The Just and Nothing tags not only serve as constructor functions, they also serve as destructors or patterns in a case expression. Which means that using these patterns you can see inside a Maybe:

    showValue : Maybe Int -> Html msg
showValue mayHaveANumber =
case mayHaveANumber of
Nothing ->
Html.text "N/A"


Just number ->
Html.text (toString number)

    You can do this, because the Maybe module is defined like

    module Maybe exposing
( Maybe(Just,Nothing)

    It could also say 

    module Maybe exposing
( Maybe(..)

    The two are equivalent in this case, but being explicit is considered a virtue in Elm, especially when you are writing a package.


  1. Hiding implementation details
    As pointed out above it is a deliberate choice that the constructor functions of Maybe are visible for other modules.

    There are other cases, however, when the author decides to hide them. One example of this in core is Dict. As the consumer of the package, you should not be able to see the implementation details of the Red/Black tree algorithm behind Dict and mess with the nodes directly. Hiding the constructor functions forces the consumer of your module/package to only create values of your type (and then transform those values) through the functions you expose.

    This is the reason why sometimes stuff like this appears in code

    type Person =
Person { name : String, age : Int }

    Unlike the type alias definition at the top of this post, this syntax creates a new "union" type with only one constructor function, but that constructor function can be hidden from other modules/packages.

    If the type is exposed like this:

    module Data exposing (Person)

    Only code in the Data module can create a Person value and only that code can pattern match on it.

小开

An alias is just a shorter name for some other type, similar class in OOP. Exp:

type alias Point =
{ x : Int
, y : Int
}

An type (without alias) will let you define your own type, so you can define types like Int, String,... for you app. For exmaple, in common case, it can use for description of a state of app:

type AppState =
Loading          --loading state
|Loaded          --load successful
|Error String    --Loading error

So you you can easy to handle it in view elm:

-- VIEW
...
case appState of
Loading -> showSpinner
Loaded -> showSuccessData
Error error -> showError


...

I think you know the difference between type and type alias.

But why and how to use type and type alias is important with elm app, you guys can refer the article from Josh Clayton


提交答案